Digital to Synchro Converter board1(DS1) is a module that converts digital data of Heading or Speed signal of simulator to analog Synchro signal, and transmits the signal to the compass repeater(CR) distribution box and electronic warfare(EW) equipment. It has been designed to meet the IIU requirements of the intagrated combat system for Submarine.
Functions | Descriptions | Remarks |
---|---|---|
MCU | ST STM32F437VGT6 - ARM 32-bit Cortex-M4F - 180MHz, 225DMIPS - 2M single-cycle Flash - 256+4KB single-cycle SRAM - 4KB of EEPROM | - |
Synchro Output | INS_90Vl-l/400Hz 3P 1CH(1X) INS_90Vl-l/400Hz 3P 1CH(36X) | REF : 115V/400Hz |
SDC | Synchro to Data Converter - 16 Bit | SDC 16A-H-3-A |
GPIO | 1 x Input 1 x Output : LED | S/W RESET STATUS |
RS-232 | 2 x RS-232 interface - Firmware Update | 74HCT1G08GV |
CAN | 2 x CANBUS interface - Monitoring and Control | SN65HVD233 |
USB 2.0 | 1 x USB 2.0 (EHCI) interface - For Debug | CP2102-GM |
I/O Connectors | 09031646951 x 1 UX60SC-MB-5S8 x 1 | for CANBUS, GPIO for RS-232 for AC 3P for AC 1P, DC_IN for USB |
Power Supply | 115V/400Hz, ±12V, +5V, +3.3V | - |
Power Consumption | Max. 3 Watts | 5V/100mA Max. 12V/100mA Max. |
Operating Temperature | -40 ~ 85°C | - |
Weight | Max. 500g | Included frame |
Key Angle | N/A | - |
Form Factors | 3U, 1 slots (100 x 167 x 19.4mm) | Customized |
Frame, WedgeLok | Forward type | - |