Synchro to Digital Converter Board1(SD1) is a module that has the function to converts the Synchro Heading analog signal input from inertial navigation system(INS), and transmit it to the network system. It has been designed to meet the IIU requirements of the intagrated combat system for Submarine.
Functions | Descriptions | Remarks |
---|---|---|
MCU | ST STM32F437VGT6 - ARM 32-bit Cortex-M4F - 180MHz, 225DMIPS - 2M single-cycle Flash - 256+4KB single-cycle SRAM - 4KB of EEPROM | - |
Synchro Inputs | INS_90Vl-l/400Hz 3P 1CH(1X) INS_90Vl-l/400Hz 3P 1CH(36X) | REF : 115V/400Hz |
SDC | Synchro to Data Converter - 16 Bit | SDC16A-H-3-A |
GPIO | 1 x Input 1 x Output : LED | S/W RESET STATUS |
RS-232 | 2 x RS-232 interface - Firmware Update | 74HCT1G08GV |
CAN | 2 x CANBUS interface - Monitoring and Control | SN65HVD233 |
USB 2.0 | 1 x USB 2.0 (EHCI) interface - For Debug | CP2102-GM |
I/O Connectors | 09031646951 x 1 UX60SC-MB-5S8 x 1 | for CANBUS, GPIO for RS-232 for AC 3P for AC 1P, DC in for USB |
Power Supply | 115V/400Hz, -12V, +5V, +3.3V | - |
Power Consumption | Max. 3 Watts | 5V/100mA Max. 12V/100mA Max. |
Operating Temperature | -40 ~ 85°C | - |
Weight | Max. 500g | Included frame |
Key Angle | N/A | - |
Form Factors | 3U, 1 slot (100 x 167 x 19.4mm) | Customized |
Frame, WedgeLok | Forward type | - |